7 Steps To Cleaning Your Own Carpets

How To Clean Your Own Carpets

It is important to keep your carpet clean at all times. A clean carpet makes your house look neat and habitable. A frequently cleaned is free from disease-causing germs. To maintain your carpet, you need a know how to clean them well. The follow article will outline the key steps for cleaning your own carpets at home.

Carpet cleaning techniques

Steam carpet cleaning machine resembles a vacuum cleaner. It cleans by projecting a spray of very hot vaporized water on the carpet’s surface. Heats in the vapor disintegrate stubborn stains and dirt from the carpet’s fabric, leaving it clean and sparkling. The reason why you should consider using a steam cleaner to clean your carpet is that the water vapor generated penetrates deep into the carpet’s fabrics where other cleaning agents don’t reach. The vapor is also able to eliminate disease-causing germs without the use of chemicals. The following cues will guide you on how to get the best steam cleaner for your carpet;

> Consider buying a multi-purpose cleaner.

> Some steam cleaners use detergent while others don’t. If you don’t want to incur extra cost brought about by the periodical purchase of detergent, then you should consider buying the device that doesn’t use detergent at all.

> The device should jet out the vapor with sufficient force

> Consider versatility of the cleaner. It is advisable to purchase a steam cleaner that can work on different surfaces.

> Familiarize yourself with how a gadget works before buying. Otherwise, you might end up buying a pricey device that does not suit your needs.

You can also eliminate recent stains on your carpet by using the spray bottle with warm water. This method, however, is not effective when the stains are widespread all over the carpet.

Carpet stain removal solutions are essential stain removers whose purpose is to get rid of stubborn stains on the carpet. It is often carried out as a pre-treatment process before embarking on a more effective general cleaning exercise such as steam cleaning. It is challenging to select the most effective stain remover in the shop.

In this age of environmental conservation, people are encouraged to purchase eco-friendly stain removers. You can normally find the ones below in yur kitchen or laundry cupboard.

The hydrogen peroxide trick – hydrogen peroxide has over 30 cleaning properties including stain removal from fabrics of almost any type. The chemical is entirely environmentally friendly.

Lemon juice – Citric acid found in lemon juice is a formidable stain remover that can clear most stains on your carpet.

White vinegar – Vinegar is a mild form of acetic acid. It can remove some of the toughest stains including burn marks, dried juices, and grease.

Baking soda – A paste of baking soda, water, and a brush can be used to clean your carpet without having to buy the often expensive environmentally unsafe chemicals in the store.

Clean cloth and brush can be used to perform preliminary cleaning before carrying out actual cleaning with other effective methods such as steam cleaning. Water is sprayed with the cleaning solution bare sprayed on the brush before scrubbing the carpet, from the center to the edges of the carpet. The cloth is soaked in clean water and rinsed before using it to wipe the areas cleaned by the brush.

Steps to follow while cleaning your carpet

Here are the 7 easy to follow steps for DIY carpet cleaning.

Step 1: Moving the furniture

It is difficult to clean the carpet when part of it is under the table. Remove furniture and other households overlying the carpet to you want to clean.

Step 2: Vacuum the room.

Vacuuming the room shortly before embarking on carpet cleaning exercise is essential to remove debris and loose dirt such as hair, dust and soil particles. Loose dirt may fall down from the rest of the room to the carpet if you choose to vacuum the carpet only. Vacuuming the whole room is therefore, advisable.

Step 3: Pre-treatment

This involves undertaking preliminary and less effective cleaning procedures such as water and bottle spray. This step serves to eliminate less stubborn stains.

Step 4: Read the machine instructions

It is important to read the user manual of the cleaning machine you intent to you use. Machines tend to have different cleaning settings for different surfaces. Ensure you adjust the machine into the correct carpet cleaning mode.

Step 5: Start the cleaning process

Begin the cleaning in one corner of the room then move across the room in straight lines. You should stop and often move back for thorough cleaning. Ensure the entire carpet is clean before allowing it to dry. Repeat the process in other rooms.

Step 6: Dry the carpet

Allow air in the room by turning on the fans and opening the door. Carpets dry faster when air blows on them. Let them dry for two hours.

Step 7: Disengaging the machine

Empty the water tank before storing the machine. It is important to rinse the tank after every cleaning exercise.


Carpet cleaning is no longer a tough job as it used to be. Machines do the hard part of the job. Regardless of the method you choose to clean your carpet, always consider environment conservation.

The How To Clean Your Own Carpets article was published by Mark Sanderson from Pro Carpet Cleaning Brisbane. If you liked this article please follow us on Google+.